The protection of electric vehicles is not to be ignored. The installation of the electric car controller can be suitable for the electric car for heat dissipation. Electric car controller installation needs to pay attention to what that?

　　1, the installation location of the controller should have a good heat dissipation environment and conditions to try to install in a well-ventilated place or in contact with other metal bodies to facilitate heat dissipation.

　　2, electric car controller location should try to choose in the electric car driving vibration small place, to prevent a long time going due to excessive vibration power lead to its internal components pin loose or open welding, can avoid due to poor contact and cause the controller work intermittently or can not function properly phenomenon occurs.

　　3, to slow down the electric car driving vibration caused by the harm caused by the controller, the installation of the controller at the bottom of its box can be padded with shock-absorbing materials (such as a sponge).

　　4, due to the controller box body of integrated circuit chips, SMD electronic components solder joints and printed lines are dense. Once there is rain, moisture is susceptible to short-circuit failure, resulting in the controller does not work correctly or can not work. Therefore, to prevent the controller box due to poor sealing or cracks so rain infiltration, the installation location of the controller, should avoid rain or water immersion.

　　5, to prevent the controller because the box body can not dissipate heat and lead to damage, the box body of the controller does not allow anything to wrap; installation of the controller space can not be fixed by stacking other objects. One to two sides of the box body are best to contact with the metal package body of the electric car to increase the conduction of heat dissipation area.

　　The primary controller circuit of the power switch tube work in a more significant current state for the heating device, plus the ensemble is closed. So its installation location must pay attention to the summer heat. A tip: the storage of chargers and chargers charging does not have direct sunlight.